BMW EntryNav2 Retrofit FSC Pack
The EntryNav2 Retrofit FSC Pack is intended for compatible
BMW and MINI vehicles equipped with a retrofitted or replacement EntryNav2
head unit.
Retrofit FSC activations authorise supported protected functions after the
head unit has been correctly installed, prepared and coded for the vehicle.
The pack normally includes the complete available FSC set for the supported
EntryNav2 configuration.
Activation method
Activation is performed using the Feature Installer
application through an ENET connection.
Feature Installer can be used on a compatible computer running
Windows 10, Windows 11 or macOS.
The procedure is straightforward and does not normally require advanced
coding knowledge. If the EntryNav2 unit already contains the correct vehicle
VIN and has been properly coded, the customer only needs to connect the
computer to the vehicle and complete the supplied activation procedure.
Before activation
The EntryNav2 head unit must be technically compatible, correctly installed
and coded for the vehicle.
A replacement or retrofitted unit must contain the correct VIN. If the VIN,
coding or software configuration is incorrect, additional preparation may
be required before the Retrofit FSC Pack can be activated.
What is included
- Vehicle-specific EntryNav2 Retrofit FSC Pack
- Feature Installer activation data
- Available supported FSC activations for the ordered configuration
- Basic activation instructions
- Digital delivery
The exact FSC content depends on the installed EntryNav2 unit, vehicle
configuration and functions supported by the head unit.
Required equipment
- Compatible EntryNav2 head unit installed in the vehicle
- ENET cable
- Computer running Windows 10, Windows 11 or macOS
- Stable internet connection
- Feature Installer application
Not included
- Feature Installer activation work
- Vehicle coding or programming
- VIN adaptation of the replacement head unit
- Head-unit flashing or software repair
- Remote connection or diagnostic session
- Hardware installation or retrofit work
Optional technical assistance
Customers may complete the Feature Installer activation independently using
the supplied instructions and required equipment.
Head-unit preparation, VIN adaptation, coding and remote activation can be
performed by our technical specialist as a separate paid service.
Important limitations
The Retrofit FSC Pack activates supported functions but does not prepare,
program, code or repair the EntryNav2 head unit.
Successful activation requires a compatible head unit with the correct VIN
and suitable coding. Purchase of the FSC Pack does not add unsupported
hardware or functions.
Required information
Provide the vehicle VIN when placing the order. The last seven characters
are normally sufficient.
Confirm that the target head unit is EntryNav2.
NBT, NBT EVO and MGU systems require their corresponding Retrofit FSC
products.
